Importing Steel from China to the Philippines: 0% ACFTA Duty, 12% VAT & No Anti-Dumping (2026)
Verified 2026-10-30 against the Tariff Commission case register and customs schedules. The Philippines is the most open large steel market in ASEAN: with an ACFTA Form E certificate of origin, Chinese steel enters at 0% duty (MFN rates are only 3–7% anyway), VAT is 12%, and — uniquely in the region — no anti-dumping duty on Chinese steel is currently in force. The Commission's register shows only legacy cases (Taiwan, Malaysia, Russia from 1998–2002); a DTI safeguard investigation on HRC/CRC has produced no definitive duty. That is why the Philippines absorbed roughly 7.28 million tonnes of Chinese steel in 2025, China's fourth-largest destination. The watch item: domestic mills periodically petition for safeguards, and low barriers today are not guaranteed forever.
Base duty & VAT on Chinese steel (2026)
| Product (HS) | MFN without C/O | ACFTA (Form E) | VAT |
|---|---|---|---|
| 7208 / 7209 / 7210 — HRC / CRC / coated | 3–7% | 0% (Form E) | 12% |
| 7225 / 7226 — alloy & plate | 3–7% | 0% (Form E) | 12% |
| 7213 / 7214 — wire rod & bars | 3–7% | 0% (Form E) | 12% |
| 7301 / 7306 — sections & tube | 3–7% | 0% (Form E) | 12% |
Even without Form E, Philippine MFN rates are among the world's lowest for steel — the origin document is cheap insurance, not a necessity.
Trade-remedy status — an empty docket, for now
For buyers used to navigating Thai, Vietnamese or Indian remedy stacks, the Philippine docket reads almost empty:
| Measure | Status | Notes |
|---|---|---|
| Anti-dumping on Chinese steel | None in force | TC register holds only legacy cases (Taiwan 1998/2001, Malaysia 1999, Russia 2000) |
| Safeguard on HRC / CRC | Investigated, no duty in force | DTI docket — verify status per shipment |
| Countervailing | None | — |
Structural reason: the Philippines produces little flat steel domestically — its construction and manufacturing sectors (Build Better More infrastructure, shipbuilding, appliances) are structurally import-dependent, so safeguard petitions face strong downstream opposition. The DTI HRC/CRC safeguard investigation has lingered without a definitive duty for years.
The plate route under 7225.40 — every lane is open
Plain plate under 7225.40 enters at 0% with Form E and faces no remedy measure of any kind — the cleanest lane in the whole tariff series. The same holds for HRC and coated products; the only friction is standard customs processing.
Baohui supplies NM400/NM450/NM500 wear plate, Q690E and BS960E into Manila and Batangas with full Form E paperwork — landed cost is essentially FOB + freight + VAT, with no remedy risk priced in.
Landed-cost cascade — worked example (25 t NM450 plate to Manila)
| Line | Amount | Note |
|---|---|---|
| NM450 plate, 25 t × $795/t FOB | $19,875 | FOB China |
| Freight + insurance to Manila | +$35/t | $875 |
| CIF value | $20,750 | duty base |
| ACFTA duty with Form E | 0% | $0 |
| VAT 12% (on CIF + duty) | +$2,490 | creditable against output VAT |
| Landed ≈ $932/t | no trade-remedy layer |
With no AD/SG layer, the Philippine landed cost is the most predictable in ASEAN; the 12% VAT is a creditable input tax for VAT-registered importers.
Documents Philippine customs will ask for
- ACFTA Certificate of Origin Form E
- Commercial invoice, packing list, bill of lading
- Mill test certificate matching the invoiced grade & HS line
- BOC accreditation of the importer (for regular importers)
Change log — what moved, and when
| Date | Change |
|---|---|
| 2021 | DTI initiates safeguard investigation on HRC/CRC (no definitive duty to date) |
| 2025 | Philippines takes ~7.28 Mt of Chinese steel — China's #4 destination, evidence of the open market |
| 2026-10-30 | Verified: no AD duty on Chinese steel in force; TC register holds only legacy non-China cases |
Related guide: electrical steel
HS 7225 also covers grain-oriented (GO) and non-oriented (NGO) electrical steel — the silicon steel grades used in transformer and motor cores. Read our guide: What is electrical steel — grades, GO vs NGO, and the global market.
Philippines steel import FAQ
What duty does Chinese steel pay in the Philippines?
0% with an ACFTA Form E certificate of origin. Even without it, MFN rates are only 3–7%. VAT of 12% applies on top and is creditable for registered importers.
Is there anti-dumping duty on Chinese steel?
No. The Tariff Commission's register shows only legacy cases against Taiwan (1998/2001), Malaysia (1999) and Russia (2000). No measure against China is in force as of October 2026.
Could a safeguard duty appear?
Possibly — the DTI investigated HRC/CRC safeguards and domestic mills periodically petition. There is no definitive duty in force; we monitor the docket and update this page when it moves.
Does the plate route (7225.40) matter here?
Less than elsewhere: every lane is open. Plate still simplifies classification and avoids any future HRC/CRC scope risk, so it remains the recommended specification for structural use.
How long does clearance take in Manila?
With complete Form E and MTC, 1–3 working days via electronic filing; port congestion at Manila can add physical dwell time.
来源与核实说明
- 1Philippine Tariff Commission — Section 711 dumping-duty case register
- 2Bureau of Customs (BOC) — Philippine tariff finder
- 3DTI — safeguard investigation docket
- 4SMM — China steel export destination analysis 2025
本页数据已于 2026-10-30 对照下列官方来源逐项核实，并每月滚动复核更新，每次复核日期见本页标注。
